iGagingAngleCube Digital Level + Bevel Gauge 2 in 1

Works great. Invaluable tool for many types of work. Magnets plenty strong. easy to read. easy to use and setup.

Very accurate, good price and an amazing quick delivery.

I've not used it extensively -- only had it a couple of weeks, but the product arrived promptly and it's well-built (metal case) with good craftsmanship and is about as compact as it could be. The screws requiring removal to insert or replace the battery are tiny, but the supplied screwdriver works fine (if I don't lose it). The storage pouch has a belt loop and adequately stores the device, but the instructions and screwdriver are left to be lost on their own. In a perfect world, I'd like it to be easier to remove/replace the battery because I like to take batteries out of my tools so they don't mess things up if/when they leak. It is simple to use and seems to be incredibly accurate. I'd certainly buy another one if I didn't have it!

Well done, a quality instrument, as is all their products I have tried so far. too bad it is not made in the USA

I received my gauge a couple of days ago, right on time. The product comes in blister packaging and includes instructions, a soft case, a 9 volt battery, and a tiny screwdriver for removing the gauge's back panel when changing the battery. The screwdriver fits in the case along with the gauge.The gauge has a metal body that feels very solid. I found the magnets strong enough when attaching the gauge to my saw blades. The controls are simple and easy to understand. The instructions are written in the kind of English we've come to expect with Chinese-made products, but they are understandable.I tested the gauge on my table saw, my miter saw, and my bandsaw. These had already been set up using non-electronic methods. As far as I can tell, the gauge reads accurately. I did find it a bit hard to adjust my blades to a specific angle because the last two digits on the display tended to jitter as I moved the blade. This may be operator error or simply the nature of the device.Overall, I'm happy with the product and look forward to using it in my shop.

I bought this unit and the accuMASTER cube at the same time for comparison. The accuMASTER is much lighter and feels much much cheaper. Also the accuMASTER only goes to a tenth of degree resolution compared to hundredths and only one magnet as opposed to three 6 technically. This unit is also sold by companies such as Baleigh industrial which right away lets me know it's quality. It is nice and substantial in your hands. Also the ability to measure angles in relationship to each other instead of just going off level is absolutely invaluable in a fabrication environment. It works more like a protractor in this way.

The main reason I bought this was to level or angle my tables and blades on saws. What sets this tool apart is that it has magnets on the sides as well as the bottom. The magnets on the sides came in handy when using the tool on my table saw and my scroll saw. A lot of other brands seem to make these, but they don't all have the magnets on the sides, which is why I decided to buy it.

I purchased this item to help me adjust blade pitch angles for my RC helicopters. I am overall very happy with its performance.Specs: (measured with digital caliper and scale)56 mm wide for all 4 sides (its a perfect square)30 mm depth6-3/4 oz (approx. 188.8 grams) weightThe product documentation claims:Resolution: 0.05 degreesRepeatability: 0.05 degreesAccuracy: +/- 0.1 degreeIt comes with a vinyl pouch, and includes the 9volt battery. Compared to other similar products which use button type batteries, 9volt batteries are more readily available and last longer, but are also heavier.It has magnets on both sides and the bottom (no magnets on the top)I particularly like that it measures the absolute angle, so it can do what a regular bubble level can do (measure 0 degrees relative to the earth), and any angle relative to this level. Of course, it gives you the ability to "Zero" on any particular angle, and measure a relative angle to that zeroed angle.The documentation also reads "U.S.A. Made Navigational Sensor", so made in the USA.

I've only got to use it a few times but so far I'm happy with it. It's got some weight to it. I bought it for my tablesaw / woodworking stuff in my garage and I think I'll be getting another one for work as I'm a welder/fabricator.

Buena calidad, fácil de usar. Muy exacto.

Works great for finding caster and camber on the race car

Good quality product.

works well. very happy with purchase.