6mm 2 Pin Panel PCB Momentary Tactile Tact Push Button Switch Through Hole Breadboard Friendly x 10 Pack
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5

6mm 2 Pin Panel PCB Momentary Tactile Tact Push Button Switch Through Hole Breadboard Friendly x 10 Pack

4.4/5
Product ID: 43603614
Secure Transaction
12 interest-free installments with tabby

Details

  • Operation Mode
    Push Button
  • Current Rating
    50 Milliamps
  • Connector Type
    Through Hole
  • Brand
    MakerSpot
  • Terminal
    Button pin
  • Actuator Type
    push button
📏6mm Size
🔌50mA Current
🔘10 Pack

Description

🔧 Push Your Projects Forward!

  • BULK VALUE - Get 10 buttons to power up your projects!
  • DURABLE BUILD - IP54 rating for protection against dust and splashes.
  • COMPACT DESIGN - Perfect for breadboard projects and tight spaces.
  • RELIABLE PERFORMANCE - Rated for 50mA, ensuring dependable operation.
  • VERSATILE CONNECTIVITY - Through hole design for easy integration.

The MakerSpot 6mm 2 Pin Panel PCB Momentary Tactile Push Button Switch is a reliable and compact solution for your electronic projects. With a current rating of 50mA and a convenient through-hole design, this 10-pack of buttons is perfect for breadboarding and prototyping. Its IP54 rating ensures durability against dust and moisture, making it a versatile choice for both hobbyists and professionals.

Specifications

Operation ModePush Button
Current Rating50 Milliamps
Connector TypeThrough Hole
BrandMakerSpot
TerminalButton,pin
Actuator Typepush button switch
International Protection RatingIP54
Number of Positions2
Controller TypePush Button
Control MethodTouch
Connectivity ProtocolX-10
Color10 Pack
Unit Count10 Count
Number of Items10
ManufacturerMakerSpot
Item Weight0.32 ounces
Package Dimensions3.8 x 2.4 x 1 inches
ASINB06XT3FLVM
Is Discontinued By ManufacturerNo
Date First AvailableJanuary 18, 2017

Have a Question? See What Others Asked

Will this bounce back automatically after pressing?
Are these normally closed? Do you sell normally closed 2 pin through hole 6 mm tactile switches I need a few. The image doesnt look like 6mm
searching for push buttons with 3 or 4 pins, two of them should be marked "no" and "nc", the one we use to control the dc motors?
Looking to put these on some custom pcbs do you have the measurements needed to create the custom footprint? i would need pin width and spacing. thx

Reviews

4.4

All from verified purchases

S**N

works well - soldered in place reinstalled board and the copier runs like new.

works well - soldered in place reinstalled board and the copier runs like new. Saved expense of having to buy a new used board for $85.00

A**R

Push button through the hole bread board push-on and release switches are great!

These push-on then release through the hole switches are used in my breadboard solderless and permanent solder circuit boards.The adequate length pins ( two pins ) make the switches easy to use with solderless breadboards, as the switches do not slide up and cause the connections to the board to become open. I recomment these switches. They are well made, and the long length pins make the build much easier for me.

J**.

they work, but beware...

This buttons will fit on a typical solderless breadboard. However the pins are delicate and bend easily when inserting into the holes on the breadboard. Be sure to take your time and if there's difficulty try a different set of holes. Some breadboards are inconsistent in regards to how tight the holes are.Once placed on a breadboard the switches work well, I haven't had any issues with them. The buttons definitely have a good tactile feel.

A**N

Nice, but photo on Amazon will not work!

These little button switches DO fit breadboards very well. They avoid the confusion of 4-lead switches, and have a nice tactile feel.I do note (quibble?) that the photo used to show that the switch fits into a standard breadboard shows the switch in a configuration where the two leads are shorted out (in the same row of the breadboard). So you might wish to correct these photos to show the correct positioning.

J**S

Great value, and they work.

These work great! I use them on my Octoprint and Retropi setups.I don't solder them in. I just use JST crimps and heatshrink tubing. Great for shutting down your Pi safely and avoiding the risk of corrupting your filesystem by just pulling the power.

J**.

They will save you time and are easy to use on a breadboard or PCB...

If you have a solder iron or a breadboard on your workbench, these are a must have! I cannot even count how many times I have been programming an Arduino or an RPi and in the code I put together a push button function for one of the pins. Then when the breadboard time comes, I have to find a pushbutton that will connect to that PIN and that is a pain. When I saw these on Amazon, my first thought was "why the heck aren't all tactiles like these?". You can just plug them in the breadboard and never wonder about the orientation (as you would with the typical tactile) and the best part is that you can just pull them off the breadboard and solder them to your prototyping PCB in no time. I am very excited to cut a corner when putting together what I am thinking of and not having to deal with push buttons with pgtails just to test a circuit.Now, to be honest, at 70 cents a piece the price is high for tactiles. But, I am willing to pay it for the ease of use and I have ordered more already.

R**N

It is ok....

It certainly does what it is supposed to do.I was actually hoping to use this as an on/off switch but these things require A LOT more pressure to press and hold down than I was anticipating. The initial pressure is not so bad, its the pressure to keep it compressed that makes the switch fail for my project.To get it to initially press down requires over 130 grams of pressure, to hold it down is about 90 grams of pressure. I was planning on using this in a much smaller weight scenario and turned out to not be at all what I needed.So if you are wondering: these are tiny stiff little on/off circuit buttons, yes they work but if you are wanting to use this in a scenario where objects less than 100 grams are used then you will need to find another type of switch.

A**R

Works as expected, thin legs

Works as expected.The legs are plenty long enough for a breadboard, but are very thin gauge.You have to be careful to insert them straight into the breadboard.Also don't apply any side force when pressing the button because the thin legs don't provide much structural support.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
AED 38

Duties & taxes incl.

UAEstore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction
12 interest-free installments with tabby

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

6mm 2 Pin Panel Pcb Momentary Tactile Tact Push Button | Desertcart UAE