Orion Motor Tech Thread Repair Kit, Metric Helicoil Repair Kit with HSS Drill Bits Thread Inserts Taps Breakoff Installation Tools, Portable Rethreading Tool Kit in M5 M6 M8 M10 M12 Sizes
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8Thumbnail 9

Orion Motor Tech Thread Repair Kit, Metric Helicoil Repair Kit with HSS Drill Bits Thread Inserts Taps Breakoff Installation Tools, Portable Rethreading Tool Kit in M5 M6 M8 M10 M12 Sizes

4.6/5
Product ID: 593625647
Secure Transaction
🔩110 inserts
⚙️5 sizes
🛠️10 tools

Description

🔧 Fix it like a pro with Orion's Thread Repair Kit!

  • EASY TO USE - 135° drill bits minimize pressure, ensuring effortless cuts.
  • BUILT TO LAST - Crafted with high-quality steel and 304 stainless for unmatched durability.
  • ORGANIZED STORAGE - Portable case keeps your tools tidy and ready for action.
  • PROFESSIONAL QUALITY - Engineered for the demanding needs of modern mechanics.
  • VERSATILE APPLICATION - Restores threads on aluminum, iron, carbon steel, and more!

The Orion Motor Tech Thread Repair Kit is a comprehensive solution for restoring stripped or damaged threads. It includes 110 thread inserts, 10 installation tools, 5 screw taps, and 5 drill bits in essential metric sizes (M5, M6, M8, M10, M12). Built with high-quality materials, this kit is designed for durability and ease of use, making it perfect for professionals and DIY enthusiasts alike.

Specifications

ManufacturerOrion Motor Tech
BrandOrion Motor Tech
Item Weight4.24 pounds
Product Dimensions15.35 x 7.87 x 2.36 inches
Country of OriginChina
Item model numberMPNTRKM131-00
Manufacturer Part NumberMPNTRKM131-00

Reviews

4.6

All from verified purchases

C**!

Great kit, but Take Your Time!

I don't normally (ever) write reviews, but I took a chance on the less expensive option, and it turned out well. I'm also going to write a review I wish I had come across when I was first discovering Helicoils and Time-serts. Fair warning: It will be long.tl;dr: this kit worked great on aluminum, but don't rush or force it!I'm a weekend warrior-type mechanic. I work on my dirt bike mainly, and have put in several Helicoils/Time-serts over the years but am by no means a professional. This task is conceptually scary, especially on engine blocks and especially the first time. But it's really pretty straightforward.The kitComes in a solid box for long term storage. Instructions a very basic. Pieces all seem like quality to me. Drill bit worked great and looked basically perfect after I used it. Same for the thread tap. Of course the tapered end looks kinda blunt, because it is, and needs to be. You get a bunch of inserts, and a small hex tool for adjusting the collar on the insertion tool. Worked great, and seems like no loss of quality by saving some money with this.In all the reviews it looks to me like all the folks who broke tools or complain about bad quality didn't use any oil.The basics1. The tools are only as good as the user. If you are the corner-cutting type (as I sometimes am) this task is probably not for you. Save yourself the frustration and take whatever it is to a professional.2. If you don't have cutting oil, go get some. Do not attempt this without it...you will indeed break tools.3. Proceed slowly and carefully. (Again, if you are in a hurry, move along.)4. In addition to this kit you will need: a drill, cutting oil(!), a tap handle, RED thread locker, possibly some tape.Ok, the steps (most of these have a picture too):1. Confirm the parts are correct in the kit...I guess some have had mix ups. The included drill bit should be larger than your bolt diameter but not by much. The outside diameter of the insert should be as wide as the width or the tap (thread cutter). Your bolt should almost fit into an uninstalled insert, but not quite.2. Figure out how far to drill to be able to insert the insert. If a precision depth is needed, mark your drill bit with tape or a small zip-tie so you don't go too far. Same for your thread tap.3. Drill out bad threads. Ideally your piece is set up firmly in a vice, if possible. Anything to minimize the possibility of drilling or threading crookedly. I used a little cutting oil during drilling to minimize friction. If drilling aluminum like I was, you don't need to go full speed and push hard, trying to drill it out in one quick go. At first the bit will catch on your bad threads, but will quickly go through them, so hold things steady and proceed slowly. You can clean up a bit with faster drilling as your hole gets deeper.4. Clean the hole of shavings. Compressed air is your friend here. Another great friend to have is a can of contact cleaner or electrical circuitry cleaner. It cuts grease, leaves no residue, acts fast, and is safe on everything: metal, plastic, electronics, paint. Available at an auto parts store or here on Amazon.5. Mount thread tap in tap handle, put some drops of cutting oil on the threads, and place into drilled hole. The tap has a tapered end, so initially it should sit in the hole and be easily removed before turning. At the beginning you will have the greatest chance of starting in crooked, so do your best to keep the tool perpendicular (in both directions) to the hole, turning slowly, and with slight pressure...just enough to feel it bite a little. If you get going a little crooked in the first couple 1/4 turns, that's okay, you should be able to keep a little pressure on the tap and steer it back to centered. The initial threads will be finalized using the full-size threads further up the tap.6. Once you get maybe 1-2 full turns and it feels like the tap won't pull out or fall over if you let go, back out the tap a 1/4 or 1/2 turn (or all the way out) to free any shavings. Proceed very slowly, and with light-medium pressure when turning. And I mean in the turning direction, not in the into-the-hole direction for that pressure. You shouldn't need to apply any downward pressure once the threads have started. As you turn, there will be spots that require almost no pressure, and some spots that require a hair more pressure than you want it to, probably. ALWAYS back out and check if you hit a spot that feels really difficult. At no point should you be torquing on the tool to the point that it snaps. Again, oil is what makes a big difference here. Some people go a 1/4 turn and back out, I was going about a full turn and then backing out. That also depends on the material. If threading steel, definitely err on the side of smaller bites. After a few full turns, I would back all the way out and remove any shavings I could with a small pick, and add more oil. More oil is much better than not enough.7. When you have cut enough full threads (past the tapered part of the tap) to place your insert where you need it (which is usually just below the surface of the part) clean out the hole with contact cleaner. Make sure to remove all the shavings and oil. Let it dry completely, which shouldn't take long with cc.8. Mount the insert on the tool with the tab at the bottom in the slot of the tool. Adjust the collar on the insert insertion tool so that it stops at the surface of your part when the insert is at the right spot in the hole. One of my pics show this. Put RED thread locker on the outside of the insert. Place the insert into the hole and begin slowly turning the tool to thread the insert in. It should go in fairly easily, but will feel a little weird because the insert is actually unspooling a little as it resists going in. Do not crank on it with all your might. If you have doubts, back out and check your previous work. Is there a shaving in your way? If you have a very shallow hole, you may not get the entire insert in. You can cut off the extra if needed. If you don't have a minimum of 3 full threads in your hole, it's probably not going to hold. If your hole is deeper than the insert, be sure to use the collar to put your insert at the spot you need it.9. Once the insert is in place, the tool should come out easily. The prongs on the end should not be bent, because you haven't been cranking hard on it trying to force things, right?10. Insert the punch tool so it sits on the tang sticking into the center of the hole at the bottom of the insert. Give it a good whack with a hammer. More than a light, tentative tap, less than trying to embed the tang in the bottom of the hole. Turn the part over or blow out the hole to remove the tang. It should look like a "V".11. Check that your bolt now threads in easily, then remove it and let your thread locker set. Grab your beverage of choice and be pleased with yourself for saving your part and learning a new skill! Congrats!

A**X

Good kit for when you need it

This was used to repair the threads on a Kohler engine valve cover bolt hole, which actually seems like a common occurrence if you look it up. I had the choice between using a thread repair kit like this one or putting a nut on the back of it since the designed allowed for that, but I went with a repair kit so I don't have to change anything about the way this would function.This kit was a perfect match for the bolts on the valve cover, and included everything you need except for the drill and a t-handle. This is important since the drill sizes are fairly uncommon for helicoil kits, and I didn't want to buy a random bit or set of bits that I won't use often. This also has the tools needed, which is a benefit to anyone doing this for the first time, like I was. Overall getting the odd size tap, odd size drill bit, the tools, and 30 helicoils, this kit was a great buy for the price.Having all of the components needed in one kit made this job go extremely quickly, and without any issues. The helicoils being stainless steel was good also since this is going to get wet, be heated up, and have a tougher life, but not a short one.I did this repair almost a year ago and it has held up without any issues. I also have enough pieces left to repair the other bolts when they fail since its a twin cylinder engine, with 2 valve covers, and 4 bolts on each cover. Then I will still have more left if I ever come across another M6x1.00 bolt, which I might since a lot of Japanese cars seem to use this size also.

S**R

Excellent Price for Helicoil Kit!

Nice kit! Only used the tap, after modifying it to be closer to a bottom tap so far. Worked well for what I needed and dimensions appear to be the same as Helicoil brand tap.Looking at the helicoil, to me appear to be slightly thinner wire than genuine Helicoils. Although I haven’t measured them yet.Since I bought this mainly for the tap I’m very happy with this kit. Price is excellent and fast shipping!Also I will update this review once measurements are taken on helicoils or if I encounter problems with rest of kit.I changed my review rating to 5stars.I added a picture of the tap I modified.I also measured the supplied helicoils wire diameter and also the wire diameter of a Helicoil brand helicoil and there is less than .0005” difference. So I see no problem there.

A**N

Work very well,

Easy to use good kit.

M**P

Worked great

I purchased this so I could repair my ebike brake rotor. The manufacturer used 6 very short M5 screws to attach the rotor to the rear wheel. The kit was easy to use and I had all 6 drilled, tapped and installed with helicoil springs in about 30 minutes. They all worked great. I'd buy again

D**E

Best solution for stripped bolt holes.

This kit saved my butt. I was torquing down a head on my 455 engine and 2 of the bolt holes in the block stripped. This was extremely easy to use and the threads seem to be way stronger than the originals. My advice - use lubricant as you drill and as you tap the new threads. Make sure you blow out the holes to keep/get debris out. Excellent product, great price!

A**A

Nice set

Everything seems to be doing what it should. Case is nice to keep wverythimg where it’s should be

R**Z

Muibuene herramienta

Me ayudó mucho este kit

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
AED 238

Duties & taxes incl.

UAEstore
1
Free Shipping

with PRO Membership

Delivery Partners: iMile, Transcorp

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Orion Motor Tech Thread Repair Kit Metric Helicoil Repair Kit | Desertcart UAE